Kompaktna 8x8 RGB LED matrica s 64 adresabilne WS2812b LED diode za Arduino, ESP8266 i ESP32.
SKU: OT2371-B13 Broj artikla: NA330 EAN: 8321317104642 Lokacija: B01.03
Alternativa
LED s WS2812B Chipom na mini PCB-u
€ 0,85
Pogledaj ovu alternativu
Ovako spoji 8x8 RGB 64 LED matrica 5V WS2812b na Arduino UNO ili ESP32, uz primjer sketcha koji možeš odmah učitati.
Ovaj projekt prikazuje adresabilnu 8x8 WS2812B RGB LED matricu spojenu izravno na Arduino Uno. Sketch inicijalizira 64 LED dioda i prikazuje rotirajući uzorak boja preko matrice pri sigurnoj razini svjetline. Spojite pinove 5V, GND i DI kao što je prikazano kako biste testirali svoju matricu za nekoliko minuta.
/*
* ==================================================================
* Generated by Codey.online — https://www.codey.online
* ==================================================================
* Project : 8x8 WS2812B RGB LED Matrix Demo
* Board : Arduino UNO (arduino:avr:uno)
* Parts : 8x8 RGB 64 LED Matrix 5V WS2812b
* Libraries : Adafruit NeoPixel 1.15.5
*
* Codey Online is an AI-powered browser IDE for Arduino and ESP32.
* Describe your project and Codey writes the code, draws the wiring
* diagram and uploads it to your board, straight from the browser.
* This code is free to use, modify and share, without warranty.
* ==================================================================
*/
#include <Adafruit_NeoPixel.h>
#define LED_PIN 6
#define LED_COUNT 64
Adafruit_NeoPixel matrix(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800);
// Converts (x, y) coordinates to pixel index (serpentine layout)
uint16_t getPixelIndex(uint8_t x, uint8_t y) {
if (y % 2 == 0) {
return y * 8 + x;
} else {
return y * 8 + (7 - x);
}
}
void setup() {
Serial.begin(115200);
matrix.begin();
matrix.setBrightness(30); // Keep brightness low when powered from Arduino 5V
matrix.show(); // Turn off all pixels
Serial.println(F("WS2812B 8x8 LED Matrix ready!"));
}
void loop() {
static uint16_t hueOffset = 0;
for (uint8_t y = 0; y < 8; y++) {
for (uint8_t x = 0; x < 8; x++) {
uint16_t pixelHue = hueOffset + ((x + y) * 65536L / 16);
uint32_t color = matrix.gamma32(matrix.ColorHSV(pixelHue));
matrix.setPixelColor(getPixelIndex(x, y), color);
}
}
matrix.show();
hueOffset += 500;
delay(20);
}
Potrebne biblioteke: Adafruit NeoPixel 1.15.5
Wiring diagram and example code generated by Codey.online — https://www.codey.online
Ovaj projekt upravlja 8x8 WS2812B RGB LED matricom pomoću ESP32. Prolazi kroz šarene uzorke duge preko svih 64 pojedinačno adresabilnih LEDs. Svjetlina je postavljena nisko kako bi se osigurao siguran rad izravno putem USB napajanja.
/*
* ==================================================================
* Generated by Codey.online — https://www.codey.online
* ==================================================================
* Project : WS2812B 8x8 RGB LED Matrix Rainbow Demo
* Board : ESP32 DEVKIT V1 (esp32:esp32:esp32doit-devkit-v1)
* Parts : 8x8 RGB 64 LED Matrix 5V WS2812b
* Libraries : Adafruit NeoPixel 1.15.5
*
* Codey Online is an AI-powered browser IDE for Arduino and ESP32.
* Describe your project and Codey writes the code, draws the wiring
* diagram and uploads it to your board, straight from the browser.
* This code is free to use, modify and share, without warranty.
* ==================================================================
*/
#include <Adafruit_NeoPixel.h>
#define LED_PIN 4
#define LED_COUNT 64
#define BRIGHTNESS 30
Adafruit_NeoPixel matrix(LED_COUNT, LED_PIN, NEO_GRB + NEO_KHZ800);
void setup() {
Serial.begin(115200);
matrix.begin();
matrix.setBrightness(BRIGHTNESS);
matrix.show();
Serial.println("WS2812B 8x8 Matrix Initialized");
}
void loop() {
// Rainbow cycle across the matrix
for (long firstPixelHue = 0; firstPixelHue < 5 * 65536; firstPixelHue += 256) {
for (int i = 0; i < matrix.numPixels(); i++) {
int pixelHue = firstPixelHue + (i * 65536L / matrix.numPixels());
matrix.setPixelColor(i, matrix.gamma32(matrix.ColorHSV(pixelHue)));
}
matrix.show();
delay(15);
}
}
Potrebne biblioteke: Adafruit NeoPixel 1.15.5
Wiring diagram and example code generated by Codey.online — https://www.codey.online
RGB LED matrica s 64 WS2812b adresabilne LED diode.
Radi na 5V i može se upravljati putem Arduino, ESP8266 i ESP32.
Dimenzije
Duljina: 6,5cm
Širina: 6,5cm
Visina: 0,3cm

| Napajanje | 5 V |
|---|---|
| Širina | 6,5 cm |
| Rezolucija | 8 x 8 |
| Prikladno za | Arduino, ESP8266 i ESP32 |
| Duljina | 6,5 cm |
| Vrsta | WS2812b |
| Visina | 0,3 cm |
U skladu s mojom narudžbom
8x8 RGB 64 LED matrica 5V WS2812b