8x8 LED matrica modul za Arduino DIY projekte sa SPI priključkom i kaskadno povezivim modulima.
SKU: OT6682 Broj artikla: XR791 EAN: 8720828223468 Lokacija: H10.01
Alternativa
LED Matrix 32x8 s MAX7219 modulom
€ 6,25
Pogledaj ovu alternativu
Ovako spoji LED Matrix Module MAX7219 Zelena na Arduino UNO ili ESP32, uz primjer sketcha koji možeš odmah učitati.
Ovaj projekt pokazuje kako upravljati 8x8 MAX7219 LED matricom s Arduino Uno. Sketch inicijalizira zaslon i izmjenjuje prikaz srca, smajlića i animacije kvadrata koji se širi.
/*
* ==================================================================
* Generated by Codey.online — https://www.codey.online
* ==================================================================
* Project : MAX7219 8x8 LED Matrix Display Demo
* Board : Arduino UNO (arduino:avr:uno)
* Parts : LED Matrix Module MAX7219
* Libraries : LedControl 1.0.6
*
* Codey Online is an AI-powered browser IDE for Arduino and ESP32.
* Describe your project and Codey writes the code, draws the wiring
* diagram and uploads it to your board, straight from the browser.
* This code is free to use, modify and share, without warranty.
* ==================================================================
*/
#include <LedControl.h>
const int DIN_PIN = 11;
const int CS_PIN = 10;
const int CLK_PIN = 13;
LedControl lc = LedControl(DIN_PIN, CLK_PIN, CS_PIN, 1);
const byte HEART[8] = {
B00000000,
B01100110,
B11111111,
B11111111,
B11111111,
B01111110,
B00111100,
B00011000
};
const byte SMILE[8] = {
B00111100,
B01000010,
B10100101,
B10000001,
B10100101,
B10011001,
B01000010,
B00111100
};
void displayPattern(const byte pattern[8]) {
for (int row = 0; row < 8; row++) {
lc.setRow(0, row, pattern[row]);
}
}
void setup() {
Serial.begin(115200);
Serial.println(F("MAX7219 LED Matrix Demo"));
lc.shutdown(0, false); // Wake up display
lc.setIntensity(0, 8); // Set brightness (0-15)
lc.clearDisplay(0);
}
void loop() {
// Show Heart
displayPattern(HEART);
delay(1500);
// Show Smile
displayPattern(SMILE);
delay(1500);
// Dot scan animation
lc.clearDisplay(0);
for (int row = 0; row < 8; row++) {
for (int col = 0; col < 8; col++) {
lc.setLed(0, row, col, true);
delay(20);
}
}
delay(500);
lc.clearDisplay(0);
delay(300);
}
Potrebne biblioteke: LedControl 1.0.6
Wiring diagram and example code generated by Codey.online — https://www.codey.online
Ovaj projekt koristi hardversko SPI sučelje ESP32 za upravljanje 8x8 MAX7219 LED matricom bez potrebe za vanjskim bibliotekama. Sketch inicijalizira zaslon i izmjenjuje prikaz smajlića, ikone srca i animacije skeniranja redaka.
/*
* ==================================================================
* Generated by Codey.online — https://www.codey.online
* ==================================================================
* Project : MAX7219 8x8 LED Matrix Demo
* Board : ESP32 DEVKIT V1 (esp32:esp32:esp32doit-devkit-v1)
* Parts : LED Matrix Module MAX7219
* Libraries : none (built-in)
*
* Codey Online is an AI-powered browser IDE for Arduino and ESP32.
* Describe your project and Codey writes the code, draws the wiring
* diagram and uploads it to your board, straight from the browser.
* This code is free to use, modify and share, without warranty.
* ==================================================================
*/
#include <SPI.h>
const int CS_PIN = 5;
// MAX7219 register addresses
const byte REG_NOOP = 0x00;
const byte REG_DIGIT0 = 0x01;
const byte REG_DECODE = 0x09;
const byte REG_INTEN = 0x0A;
const byte REG_SCAN = 0x0B;
const byte REG_SHUT = 0x0C;
const byte REG_TEST = 0x0F;
// 8x8 Bitmaps
const byte SMILE[8] = {
0b00111100,
0b01000010,
0b10100101,
0b10000001,
0b10100101,
0b10011001,
0b01000010,
0b00111100
};
const byte HEART[8] = {
0b00000000,
0b01100110,
0b11111111,
0b11111111,
0b11111111,
0b01111110,
0b00111100,
0b00011000
};
void max7219Send(byte reg, byte data) {
digitalWrite(CS_PIN, LOW);
SPI.transfer(reg);
SPI.transfer(data);
digitalWrite(CS_PIN, HIGH);
}
void clearDisplay() {
for (byte i = 1; i <= 8; i++) {
max7219Send(i, 0x00);
}
}
void displayBitmap(const byte bitmap[8]) {
for (byte i = 0; i < 8; i++) {
max7219Send(i + 1, bitmap[i]);
}
}
void setup() {
Serial.begin(115200);
pinMode(CS_PIN, OUTPUT);
digitalWrite(CS_PIN, HIGH);
// Initialize hardware SPI (SCK=18, MISO=19, MOSI=23, SS=5)
SPI.begin(18, 19, 23, CS_PIN);
// Configure MAX7219 registers
max7219Send(REG_TEST, 0x00); // Normal operation (display test off)
max7219Send(REG_SCAN, 0x07); // Scan all 8 digits/rows
max7219Send(REG_DECODE, 0x00); // Raw matrix mode (no BCD decoding)
max7219Send(REG_INTEN, 0x04); // Medium brightness (0x00 to 0x0F)
max7219Send(REG_SHUT, 0x01); // Normal operation (wake up)
clearDisplay();
Serial.println("MAX7219 LED Matrix ready!");
}
void loop() {
// Show Smiley Face
displayBitmap(SMILE);
delay(2000);
// Show Heart Icon
displayBitmap(HEART);
delay(2000);
// Row scan animation
clearDisplay();
for (byte r = 1; r <= 8; r++) {
max7219Send(r, 0xFF);
delay(100);
max7219Send(r, 0x00);
}
}
Wiring diagram and example code generated by Codey.online — https://www.codey.online
MAX7219 je IC koji se koristi za upravljanje LED panelima s zajedničkom katodom, 7-segmentnim zaslonima i indikatorima razine koji komuniciraju putem SPI sučelja. Ova pločica ima 8x8 dot matrix LED zaslon. Više modula može se ulančati pomoću header priključaka.
Specifikacije:

| Dimenzije | 3,2 cm x 3,2 cm x 1,3 cm |
|---|---|
| Radni napon | 5V |
| Rezolucija | 8 x 8 |
| Kompatibilnost | Kompatibilno s Arduino UNO R3 / Arduino Mega2560 |
| IC upravljača | MAX7219 |
| Napon logike sučelja | 5V |
| Vrsta sučelja | SPI |
| Priključci | VCC, GND, DIN, CS, CLK |
| Arduino biblioteke | Max72xxPanel i Adafruit_GFX |
| Boja LED-a | zeleno |
| Veličina LED-a | 5 mm |
| Broj kaskadnih čvorova | 32 (MAX) |
| Vrsta zaslona | zaslon sa zajedničkom katodom |
| Rupe za montažu | 4 x 3 mm |
| Radna struja | 250mA (MAX) |
Još nema recenzija.
LED Matrix Module MAX7219 Zelena