8x8 LED matrični modul za Arduino DIY projekte sa SPI upravljanjem i modulima koji se mogu kaskadirati.
SKU: OT3643 Broj artikla: AA185 EAN: 8720618489722 Lokacija: H05.05
Alternativa
LED Matrix 32x8 s MAX7219 modulom
€ 6,25
Pogledaj ovu alternativu
Ovako spoji LED Matrix Module MAX7219 Crveni na Arduino UNO ili ESP32, uz primjer sketcha koji možeš odmah učitati.
Ovaj projekt pokazuje kako upravljati 8x8 LED matricom pomoću upravljačkog čipa MAX7219. Inicijalizira zaslon i redom prikazuje nasmiješeno lice, ikonu srca i skenirajući uzorak piksela.
/*
* ==================================================================
* Generated by Codey.online — https://www.codey.online
* ==================================================================
* Project : MAX7219 8x8 LED Matrix Display Demo
* Board : Arduino UNO (arduino:avr:uno)
* Parts : LED Matrix Module MAX7219
* Libraries : LedControl 1.0.6
*
* Codey Online is an AI-powered browser IDE for Arduino and ESP32.
* Describe your project and Codey writes the code, draws the wiring
* diagram and uploads it to your board, straight from the browser.
* This code is free to use, modify and share, without warranty.
* ==================================================================
*/
#include <LedControl.h>
const int DIN_PIN = 11;
const int CS_PIN = 10;
const int CLK_PIN = 13;
LedControl lc = LedControl(DIN_PIN, CLK_PIN, CS_PIN, 1);
// 8x8 bitmap patterns
const byte SMILEY[8] = {
0b00111100,
0b01000010,
0b10100101,
0b10000001,
0b10100101,
0b10011001,
0b01000010,
0b00111100
};
const byte HEART[8] = {
0b00000000,
0b01100110,
0b11111111,
0b11111111,
0b01111110,
0b00111100,
0b00011000,
0b00000000
};
void drawPattern(const byte pattern[8]) {
for (int row = 0; row < 8; row++) {
lc.setRow(0, row, pattern[row]);
}
}
void setup() {
Serial.begin(115200);
Serial.println(F("MAX7219 LED Matrix Demo"));
lc.shutdown(0, false); // Wake up display
lc.setIntensity(0, 5); // Brightness (0-15)
lc.clearDisplay(0);
}
void loop() {
// Show smiley face
drawPattern(SMILEY);
delay(2000);
// Show heart
drawPattern(HEART);
delay(2000);
// Clear display
lc.clearDisplay(0);
delay(500);
// Scan a single pixel across all rows and columns
for (int row = 0; row < 8; row++) {
for (int col = 0; col < 8; col++) {
lc.setLed(0, row, col, true);
delay(30);
lc.setLed(0, row, col, false);
}
}
delay(500);
}
Potrebne biblioteke: LedControl 1.0.6
Wiring diagram and example code generated by Codey.online — https://www.codey.online
Ovaj projekt pokazuje kako upravljati 8x8 MAX7219 LED matričnim zaslonom pomoću hardverskog SPI sučelja ESP32. Sketch inicijalizira registre zaslona i izmjenjuje prikaz ikone srca i smajlića.
/*
* ==================================================================
* Generated by Codey.online — https://www.codey.online
* ==================================================================
* Project : MAX7219 LED Matrix Display Demo
* Board : ESP32 DEVKIT V1 (esp32:esp32:esp32doit-devkit-v1)
* Parts : LED Matrix Module MAX7219
* Libraries : none (built-in)
*
* Codey Online is an AI-powered browser IDE for Arduino and ESP32.
* Describe your project and Codey writes the code, draws the wiring
* diagram and uploads it to your board, straight from the browser.
* This code is free to use, modify and share, without warranty.
* ==================================================================
*/
#include <SPI.h>
const int PIN_CS = 5;
// MAX7219 register addresses
const byte REG_NOOP = 0x00;
const byte REG_DIGIT0 = 0x01;
const byte REG_DECODEMODE = 0x09;
const byte REG_INTENSITY = 0x0A;
const byte REG_SCANLIMIT = 0x0B;
const byte REG_SHUTDOWN = 0x0C;
const byte REG_DISPLAYTEST = 0x0F;
const byte heart[8] = {
0b00000000,
0b01100110,
0b11111111,
0b11111111,
0b11111111,
0b01111110,
0b00111100,
0b00011000
};
const byte smile[8] = {
0b00111100,
0b01000010,
0b10100101,
0b10000001,
0b10100101,
0b10011001,
0b01000010,
0b00111100
};
void writeRegister(byte reg, byte data) {
digitalWrite(PIN_CS, LOW);
SPI.transfer(reg);
SPI.transfer(data);
digitalWrite(PIN_CS, HIGH);
}
void showBitmap(const byte bitmap[8]) {
for (byte i = 0; i < 8; i++) {
writeRegister(REG_DIGIT0 + i, bitmap[i]);
}
}
void setup() {
Serial.begin(115200);
Serial.println("MAX7219 LED Matrix Demo Started");
pinMode(PIN_CS, OUTPUT);
digitalWrite(PIN_CS, HIGH);
SPI.begin();
writeRegister(REG_DISPLAYTEST, 0x00); // Normal operation
writeRegister(REG_SCANLIMIT, 0x07); // Display all 8 rows
writeRegister(REG_DECODEMODE, 0x00); // No BCD decoding (raw matrix)
writeRegister(REG_INTENSITY, 0x04); // Brightness (0x00 to 0x0F)
writeRegister(REG_SHUTDOWN, 0x01); // Wake up from shutdown
}
void loop() {
showBitmap(heart);
delay(1000);
showBitmap(smile);
delay(1000);
}
Wiring diagram and example code generated by Codey.online — https://www.codey.online
MAX7219 je IC koji se koristi za upravljanje LED panelima s zajedničkom katodom, zaslonima sa 7 segmenata i indikatorima razine koji komuniciraju putem SPI sučelja. Ova ploča ima 8x8 dot matrix LED zaslon. Više modula može se kaskadno povezati pomoću header spojeva.
Specifikacije:

| Dimenzije | 3,2 cm x 3,2 cm x 1,3 cm |
|---|---|
| Radni napon | 5V |
| Kompatibilnost | Kompatibilno s Arduino UNO R3 / Arduino Mega2560 |
| IC upravljača | MAX7219 |
| Napon logike sučelja | 5V |
| Vrsta sučelja | SPI |
| Priključci | VCC, GND, DIN, CS, CLK |
| Arduino biblioteke | Max72xxPanel i Adafruit_GFX |
| Boja LED-a | crveno |
| Veličina LED-a | 5 mm |
| Broj kaskadnih čvorova | 32 (MAX) |
| Rupe za montažu | 4 x 3 mm |
| Radna struja | 250mA (MAX) |
Odličan proizvod.
LED Matrix Module MAX7219 Crveni