BMS board for 6 18650 batteries in series, with charging and protection against deep discharge and overcharging.
SKU: OT3585 Article number: NA651 EAN: 8720618690609 Location: D08.07
Alternative
3S Lithium Battery Protection BMS Board for 18650 18550 Li-Ion Lipo Battery 11.1V 12.6V 20A
€ 2,49
View this alternative
This board is ideal for, for example, connecting 6 18650 batteries in series and charging them at the same time. It protects the batteries from being discharged too deeply and also protects against overcharging.
Size: approximately 50 * 30 * 2 mm
Maximum discharge current: 15A
Instantaneous discharge current Max: 25A
Charging voltage: 25.5V
Charging current: 15A (MAX)
Overload detection voltage: 4,28 ± 0,05V
Overcharge protection delay: 0.1S
Overcharge voltage: 4,08 ± 0,05V
Overdischarge detection voltage: 2,55 ± 0,08V
Overdischarge detection delay: 0.1S
Overdischarge voltage: 2,9 ± 0,1 V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 9MS
Overcurrent protection current: 30 ± 3A
Overcurrent protection release state: Disconnect the load!
Short-circuit detection delay: 250uS
Short-circuit protection release condition: disconnect negative open
Main circuit conduction resistance: ≤20m
Operating current: ≤30uA
Sleep current (battery overdischarge) ≤10uA
Temperature range: -30 / + 80
Dimensions
Length: 5cm
Width: 3,2cm
Height: 0,2cm

| Dimensions | 50 x 30 x 2 mm |
|---|---|
| Temperature range | -30 / + 80 |
| Charging voltage | 25.5V |
| Charging current | 15A |
| Maximum discharge current | 15A |
| Operating current | ≤30uA |
| Immediate discharge current Max | 25A |
| Overcharge detection voltage | 4,28 ± 0,05V |
| Overcharge voltage | 4,08 ± 0,05V |
| Overdischarge detection voltage | 2,55 ± 0,08V |
| Overdischarge voltage | 2,9 ± 0,1 V |
| Overcurrent detection voltage | 150mV |
| Overcurrent detection delay | 9MS |
| Overcurrent protection current | 30 ± 3A |
| Short circuit detection delay | 250uS |
| Main circuit conduction resistance | ≤20m |
| Sleep current | ≤10uA |
Not 100% what I was looking for, but it works just fine
6S 15A 22V 24V BMS for lithium batteries