Digital Thermostat Relay with 2 Displays (Red & Blue) XH-W1219

W1219 thermostat with a dual digital display (the upper display shows the current temperature, the lower display shows the set temperature).

A not too complicated module of an integrated thermostat that can control loads up to 2300W.

Setting the temperature is very simple, just press the "SET" button and the display will start blinking. Then, use the + and - buttons to set the desired temperature value.

The module has a heating and cooling function: H / C, depending on the selected mode. In H mode, the relay is switched on below the set value until it is reached.
On the other hand, the C function, i.e. cooling, will switch the relay on above the set temperature and will operate until it is reached.

The module remembers the set value even after disconnecting the power supply.

• Power supply voltage 12 VDC
• Current consumption 65mA
• Contact load 20A (for 14VDC)
• Contact load 10A (for 230VAC)
• Temperature control range -50 to 110C
• Resolution 0.1C
• Measurement frequency 2 / s

Supplied including wire and temperature sensor

View the manual here