NodeMCU ESP8266 V3 4MB Development Board WiFi

This is the large ESP8266 development board with onboard WiFi and is ideal for IoT (Internet Of Things) projects because it has onboard WiFi. Please note that it does not fit properly on one breadboard. You will need to connect 2 breadboards.

This ESP8266 can also be programmed via the Arduino IDE. Watch the YouTube video above for the installation of this board in the Arduino IDE.

Using Arduino IDE, go to File, Settings, and enter the following URL under More Board Manager URLs: http://arduino.esp8266.com/stable/package_esp8266com_index.json

The NodeMCU ESP8266 V3 4Mb CH340G with WiFi is an excellent choice for creating great IoT projects. This open-source board is equipped with an integrated ESP8266 chip, which runs at 40 MHz and has enough pins to meet all the Wi-Fi needs of standard IoT projects. Thanks to the open-source firmware, you can improve the kit with user-made updates and upgrades. This, combined with the board's smart features, makes the NodeMCU a great starting point for prototyping and developing your own IoT devices. This version of odemcu V3 contains the CH340G chip instead of the CP2102 serial chip to save costs. If you are interested in getting started with IoT development, this board is definitely interesting for you.

Specifications:

• Micro-USB interface
• 10 GPIO pins
• 25dBm WiFi transmit power
• 5V power (10V max)
• MicroUSB power / data input
• Supply voltage: 3.3 V (LOGICAL LEVELS: 3.3 V)
• Supported protocols: 802.11 b / g / n
• Network support: 2.4 GHz
• Band: 2400 (MHz)
• Wi-Fi Direct (P2p), Soft Access Point
• Integrated TCP / IP stack
• PLL, regulators and integrated power management units
• Output power: 0.15 (W); + 19.5dBm in 802.11b mode
• Low power consumption mode: <10 uA
• Integrated 32-bit processor
• Supports WPA / WPA2
• Supports Lua, AT
• Supports three operating modes: AP, STA, STA + AP
• Type of communication interface: SPI, Serial, UART (115200 bps)
• Dimensions: 24 mm x 16 mm