Arduino UNO R3 DIP Compatible removable chip incl. USB cable

Arduino UNO R3 compatible board including USB cable and 40 header pins. Can be used in the standard Arduino IDE software.

This UNO R3 works exactly the same as the original Arduino UNO R3 and can be programmed with the Arduino IDE software. This is available for Windows, Mac, and Linux.

The Atmega328P chip can be easily replaced. This is useful if an Arduino is built into a project and the program needs to be adjusted.

Download Arduino IDE

NOTE: This Arduino Clone is based on the CH340 USB chip. Sometimes it is necessary to install the driver for this for Windows or Mac. With Linux, this rarely happens.

First, try if it works without installing the driver. If a COM port is available in the Arduino IDE to which you can upload, then everything is fine and nothing needs to be installed.

If necessary, you can download the required driver here:

Download CH340 driver for Windows

Download CH340 driver for Mac

Download CH340 driver for Linux

Disclaimer: Downloading and installing the offered drivers is an extra service from us and entirely at your own risk. We cannot guarantee that the offered drivers are up-to-date. Any malfunctions caused by the use of these drivers are the responsibility of the person who installs the drivers.

Dimensions
Length: 6.84cm
Width: 5.31cm
Height: 1cm