CC2500 2.4Ghz RF Transceiver Module

Designed based on TI-Chipcon's CC2500 wireless transceiver chip, the 24TRGC3 is a compact, cost-effective remote wireless transceiver module, widely used in smart home, toys, aeromodelling and control fields for short-distance data transmission. Sensitivity up to -105dbm, maximum transmission rate up to 500Kbps, output power via register configuration range from -30dbm to +1dbm. The module is integrated with all RF-related devices and has a built-in PCB antenna, so excellent RF performance can be obtained without additional antenna configuration.

This module uses standard 8PIN output. RSSI and power-saving mode can be effectively set in the application to reduce costs. You can easily develop wireless products with stable performance and high reliability directly, which greatly shortens the development cycle without in-depth understanding of RF circuit design. Manual soldering is required due to the different thermal expansion coefficients of the black glue and the bonding wire inside.

Applications

Logistics tracking, warehouse patrols, RFID (radio frequency identification);
Replace 232, 485 for wireless data communication;
Wireless data collection and control for industrial instruments and meters;
Automatic AMR (water, electricity, gas) meter reading system
Building and home control (smart home);
Wireless remote control for electronic consumer products;
Wireless alarm, security and protection system
Wireless sensor network, etc.

Features

The intermediate frequency is 2433 MHz, can work in the range of 2400 ~ 2483,5 MHz
The maximum output power is +1dBm and the transmission distance in open air is more than 100m
High receiving sensitivity, up to -105dbm (2,4Kbps)
Support GFSK/OOK/2-FSK/ASK/MSK modulation mode, programmable control
Communication speed 1,2 ~ 500Kbs, programmable configuration;
Separate 64byte data buffer for send/receive
Separate 64-byte RX FIFO and TX FIFO
Built-in CRC check to ensure reliable data transmission
Supports carrier listen function;
Digital RSSI output;
Low power consumption, receive current less than 15 Ma, emission current less than 25 mA;
With a low power consumption mode, the power consumption is less than 2 uA;
Standby and receive status switching time can be set to reduce power consumption, under the WOR function;
Integrated temperature sensor;
Four-line SPI interface, strong versatility;
Power supply: 1.8~3.6V DC

CC2500 datasheet

Dimensions
Length: 1,5cm
Width: 1,1cm
Height: 0,15cm