Raspberry Pi Pico (OT8733)

This Raspberry Pi Pico is equipped with an RP2040 chip. It has 2 cores with a clock speed of 133Mhz and an on-chip memory of 264kb. In addition, there is 2MB of flash memory available. The Raspberry Pi Pico has 30 GPIO pins. 4 of these pins are for analog input. There is also a DMA controller, 2 SPI controllers, 2 UARTs, 2 I2C controllers and 16 PWM channels. In short, a very versatile microcontroller. The Pico can be powered with a voltage between 1.8V and 5.5V. The USB connection of the Raspberry Pi Pico is a micro-USB 1.1 connection. In addition to programming the Pico, this can also be used as a USB host and as a USB device. NOTE: This is not a regular Raspberri Pi and you cannot run Linux on it. This Pico is a microcontroller and executes Micropython code.What is the difference between a Raspberry Pi Zero and a Raspberry Pi PicoThe Zero is a microcomputer and the Pico is a microcontroller. On the Zero you run an OS like Linux while the Pico only executes micropython code. It also does this directly, without having to boot. The Zero will need to boot its OS before it can be used.Raspberry Pi Pico FeaturesRP2040 microcontroller chip developed by Raspberry Pi in England.Dual-core Arm Cortex M0+ processor with flexible clock speeds up to 133 MHz264KB SRAM and 2MB on-board Flash memoryMicro USB 1.1 with device and host capabilityLow power consumption sleep mode26x multifunctional GPIO pins2x SPI2x I2C2x UART3x 12-bit ADC16x controllable PWM channelsAccurate clock and timer on-chipBuilt-in temperature sensorAccelerated floating-point libraries on-chip8x Programmable I/O (PIO) state machines for custom peripheralsRaspberry Pi Pico Datasheet PDFDimensionsLength: 5.13cmWidth: 2.1cmHeight: 0.39cm