UNO R3 DIP Arduino compatible removable chip incl. USB cable (OT3475)

Arduino UNO R3 compatible board including USB cable and 40 header pins. To be used in the standard Arduino IDE software.
This UNO R3 has exactly the same operation as the original Arduino UNO R3 and can be programmed with the Arduino IDE software. This is available for Windows, Mac and Linux.
The Atmega328P chip can easily be replaced. This is useful if an Arduino is built into a project and the program needs to be adjusted.
Download Arduino IDE
NOTE: This Arduino Clone is based on the CH340 USB chip. Sometimes it is necessary to install the driver for this for Windows or Mac. With Linux this is actually rarely the case.
First try if it works without installing the driver. If there is a COM port available in the Arduino IDE that you can upload to, then everything is fine and nothing needs to be installed.
If necessary, you can download the required driver here:
Download CH340 driver for Windows
Download CH340 driver for Mac
Download CH340 driver for Linux
Disclaimer: Downloading and installing the offered drivers is an additional service from us and entirely at your own risk. We cannot guarantee that the offered drivers are up-to-date. Any malfunctions that arise from the use of these drivers are at the risk of the person who installs the drivers.
DimensionsLength: 6.84cmWidth: 5.31cmHeight: 1cm