Wireless Programmable Relay Module incl. Remote Control (4 buttons) - 12V 433MHz RF

This is a multifunctional relay module with RF remote control. The package includes:

1. Relay board with receiver
2. Remote control with 4 buttons (Large A/B and small C/D)
3. Housing in the form of a plastic box with locking clip for the relay board

Multifunctional and programmable per button:

• Momentary switch (press the button to turn on and release to turn off)
• Self-lock switch (press the button to turn on and press the button again to turn off)
• Self-lock with 2 buttons (button 1 turns on and button 2 turns off)
• Time delay function adjustable for 5 sec, 10 sec, 15 sec or 20 seconds (the relay switches on and only switches off again after the set number of seconds)

Features

• Operating voltage: 10-14V;
• Operating current: 40 mA (relay coil)
• Quiescent current: 6 mA (without active relay)
• 433 Mhz RF wireless reception
• Transmitting distance > 100m (open space)
• Receiving distance: 80 m
• Relay max load: 250V AC-10A, 125V AC- 10A;30V -10A;28V -10A
• Relay dimensions: 35x30x18mm
• Remote control dimensions: 55x30x13mm

Instructions for programming the button function
Using the programming button on the circuit board, this relay can be set to the desired operation.

Pulse or momentary relay

Function: Each button on the remote control can be set as a momentary switch. Press the button and the relay switches on, and the button must be held down to keep it on. As soon as the button is released, the relay switches off again.

Programming: Press the Programming button once; the blue LED on the circuit board flashes once. Now press the desired button on the remote control and the LED on the circuit board flashes 3 times to confirm. The button is now programmed and active.

Self-lock relay

Function: Each button on the remote control can be set as a self-lock switch. Press the button and the relay switches on. Press the button again and the relay switches off again.

Programming: Press the Programming button twice; the blue LED on the circuit board flashes twice. Now press the desired button on the remote control and the LED on the circuit board flashes 3 times to confirm. The button is now programmed and active.

Time delay relay 5 seconds

Function: When the assigned button is pressed, the relay turns on immediately and switches off again after 5 seconds.

Programming: Press the Programming button 4 times; the blue LED on the circuit board flashes 4 times. Now press the desired button on the remote control and the LED on the circuit board flashes 3 times to confirm. The button is now programmed and active.

Time delay relay 10 seconds

Function: When the assigned button is pressed, the relay turns on immediately and switches off again after 10 seconds.

Programming: Press the Programming button 5 times; the blue LED on the circuit board flashes 5 times. Now press the desired button on the remote control and the LED on the circuit board flashes 3 times to confirm. The button is now programmed and active.

Time delay relay 15 seconds

Function: When the assigned button is pressed, the relay turns on immediately and switches off again after 15 seconds.

Programming: Press the Programming button 6 times; the blue LED on the circuit board flashes 6 times. Now press the desired button on the remote control and the LED on the circuit board flashes 3 times to confirm. The button is now programmed and active.

Time delay relay 20 seconds

Function: When the assigned button is pressed, the relay turns on immediately and switches off again after 20 seconds.

Programming: Press the Programming button 7 times; the blue LED on the circuit board flashes 7 times. Now press the desired button on the remote control and the LED on the circuit board flashes 3 times to confirm. The button is now programmed and active.

Relay RESET

Function: Clear all settings

Programming: Press the Programming button 8 times; the blue LED on the circuit board flashes 8 times. All button functions are now cleared.