Wireless Relay Module incl. Remote Control (2 buttons) - 12V, 1 Channel, 433MHz RF

1 Channel Relay Module with RF remote control. Consists of a Relay receiver module and a remote control with 2 buttons.

The buttons are programmable and can be set as pulse (as long as the button is pressed, the relay will remain switched), on/off or self-lock (press once is on and press again is off), or interlock (on with one button and off with the other button).

• Operating voltage: 10-14V;
• Operating current: 40 mA (relay operating state)
• Standby current: 6 mA (relay release state)
• 433 MHz RF wireless reception
• Transmission distance > 100m (open space)
• Reception distance: 80 m
• Operating mode: pulse, self-lock or interlock
• Operating indication: LED1 (power indicator light)
• Relay load capacity: 250V AC-10A, 125V AC-10A; 30V-10A; 28V-10A
• Relay dimensions: 35x32x17mm
• Remote control dimensions: 52x40x13mm

Pairing the relay module with the remote control

Press the pairing button on the relay board once. Then press the button on the remote control that needs to be paired.

NOTE: The pairing button may be in a different location on the board, but there is always only one white pairing button.

It is possible to control 2 relay modules with 1 remote control.

Pulse or momentary relay

Each button on the remote control can be set as a pulse switch. Press the button and the relay switches on, and the button must be held down to keep it on. As soon as the button is released, the relay switches off again.

Self-lock relay

Each button on the remote control can be set as a self-lock switch. Press the button and the relay switches on. Press the button again and the relay switches off again.

Interlock relay

Each button on the remote control can be set as an on or off switch. Press button 1 and the relay switches on. Press the other button and the relay switches off again.

With a jumper you can set how the relay should function.