Components
-27%
RGB LED strip of 5 meters long and 300 WS2812B LEDs and can therefore be controlled separately. To control this LED strip you need a controller...
RGB LED Matrix with 64 WS2812b addressable LEDs. Works on 5V and can be controlled via Arduino, ESP8266 and ESP32. Dimensions Leng...
MOS FET Driver Module IRF520 for controlling LED strips, electric motors or pumps with a higher voltage than the 5V of the Arduino. Up to 24 Volt and ...
This MOSFET module based on IRF540 MOSFET makes it possible to control 4 different high-power devices. The LED on the module indicates w...
This type of High Power LEDs are often used for spot lighting with a luminous flux. These LEDs are covered with a kind of...
Electrolytic Capacitor (ELCO) This capacitor has a capacity of 220 uF and 16 volts. The temperature range is -40°C to 105°C. <p...
A set of 600 resistors with 30 different values for your electronics project. <span style="color: rgb...
This LED will quickly change color (fade) and then flash from red to green to blue when supplied with 3V to 3.2V. This creates i...
The KBPC5010 bridge rectifier is a high performance rectifier used to convert alternating current to direct current for a wide range of applications....
Dual potentiometer with a resistance of 10K ohm and linear ratio. Suitable for stereo applications with 6 pins for easy installation....
Small potentiometer with multiple turns for extra accuracy. Specifications: Resistance: 10k Resistance progression: Linear No. of...
This LED matrix consists of 4x MAX7219 LED panels of 64 LEDs (8x8). In total this matrix is 32 by 8 p...
High quality resistors with 5% tolerance and 1/4 Watt power limitation they are ideal for Arduino or NodeMCU ESP8266 or EPS32 projects...
10K Ohm potentiometer (single) including plastic cap. This potentiometer is handy because the legs also fit in a breadboard. When you are done...
Great for projects that need an extremely bright light in the wide angle! 5mm Piranha LEDs, also called Super Flux LED, are among the...
10K potentiometer. This potentiometer is handy because the legs also fit in a breadboard. When you are done prototyping you can drill a hole i...
Laser diode Module 5 volt and 5mW designed as a module and suitable for breadboard and Arduino....
A nice robust red laser pointer module (gives one dot) with a diameter of 12mm Power: 5 mW max Voltage: 3.5 V to 5 V Max....