Microcontrollers

An Arduino Nano clone. Works just as well but is a lot cheaper. Note, the headers are supplied separately and you have to solder them yourself. Microc...

The ST-Link V2 for STM8 and STM32 compatible is a programming module for the STM8 and STM32 microcontrollers. On the one hand,...

Case for the Arduino UNO R3 Color: White Dimensions Length: 7.84cmWidth: 6.14cmHeight: 2.56cm...

This ESP12-E is an Ultra-Low-Power UART WiFi module specially designed for the demands of the network world. It offers enormous functions in a very co...

The CS32 STM32 clone, also called Blue Pill, is an extra...

D1 Mini Pro Board with 16 MB flash memory and ESP8266 chipset. The board can be programmed with Arduino IDE, has the CP2104 USB chipset and makes it m...

Specifications: <span style=color:rg...

This shield is suitable for an Arduino Uno, Arduino Mega or Arduino Due. The shield makes a USB host of the microcontroller. This makes it possible to...

- Voltage: 3.3V - Supported WiFi types: 802.11 b/g/n - Wi-Fi Direct (P2P), soft-AP - Integrated TCP/IP protocol stack - Power: +19....

ESP8266 ESP-12E Motor Drive Board NOTE: Only suitable for <a href=https://www.otronic.nl/a-59667487/esp8266/nodemcu-esp8266-v2-4mb-develop...

Arduino UNO R3 Compatible including USB cable and 40 header pins. To be used in the standard Arduino IDE software. This UNO R3 has exactly the same op...

Sensor shield for the Arduino Uno, Mega and Duem...

Material: ABS Color: Blue Dimensions Length: 7.55cm Width: 6cm Height: 2.3cm...

Input voltage 6v - 24v With onboard 3V and 5V pins. NOTE: Only suitable for the <a href=https://www.otronic.nl/a-60635670/esp8266/nodemcu-esp8...

– Digital IO Port 13 ports prepared for digital modules or servos– Analog IO Port 6 ports prepared for sensor input analog- Analog / dig...

Arduino Uno R4 Minima Compatible: Compatible with UNO R3, 5V. Has 12-bit DAC, CAN BUS, OPAMP, and supports up to 24V input. Includes SWD connector and...

This power shield from Velleman / Whadda can control relays, solenoids, DC and stepper motors....

Case for the Arduino UNO R3 Color: Transparent Blue Dimensions Length: 7.8cmWidth: 6.12cmHeight: 2.51cm...

An Arduino compatible D1 R2 board with an ESP8266 on board. Arduino UNO shields can also be used on this, if compatible. Check this go...